XV-Z7000 (serv.man21). Complete (part1 part2) - Sharp Projector User Guide / Operation Manual. Page 4

Allows projection of DVD, DTV and other anamorphic images recorded in widescreen format with a 16:9 aspect ratio. (Page
31)

Function with toggle switch to control the quantity of projected light. Select “ON” or “OFF” to decrease or increase brightness,
power consumption and fan noise. (Page 33)

Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems.
(Page 11)

Provides high quality images with minimal dot crawl and cross colour noise.

Equipped with new 3D digital uniformity technology for a clearer, more uniform image.

Optimises the image by converting the interlaced signal to the progressive. Useful for displaying slow-moving images or still
images. Four modes are available, and the film mode beautifully reproduces movie film recorded in 24 Hz progressive format.
(Page 25)

Utilises a component video input signal (Y, C

B

, C

R

). The video signal is input as separate components to provide superior

colour and image quality.

Corrects keystone distortion caused when the projected image is not perpendicular to the screen. This method provides not
only horizontal correction, but vertical as well, thus maintaining the original 4:3 aspect ratio and eliminating jag lines. (Page 19)

A multi-colour menu system allows for simple image adjustments. (Page 20)

The function can be used to adjust the colour temperature to suit the type of image input to the projector. (Page 29)

The gamma value setting can be adjusted according to the input source for optimal image contrast. (Page 30)

A multi-scan RGB input accepts signals from VGA (640 dots 

⳯ 480 lines) to SXGA (1,280 dots ⳯ 1,024 lines) and Macintosh

(from 13

ⴖ) compatible computers without the need for any additional hardware.

*DTV is the umbrella term used to describe the new digital television system in the united states.