XV-Z2000E (serv.man18). XV-Z2000 p18-22 Removing of major parts - Sharp Projector Service Manual (repair manual). Page 5

9-1. Install the four nuts.
9-2. Fit the reinforement (bracket-A) in position.
9-3. Place the earth shield (L) as specified.
9-4. Fit the reinforcement (bracket-B) in position.
9-5. Tighten up the four M3 screws.
9-6. Tighten up the four M4 screws.
9-7. Place the earth shield (S) as specified.
9-8. Melt the 17 pins of the earth shield.

9-3

Earth Shield (L)

M4 screw (4 locations)

9-7

Earth Shield (S)

9-6

Reinforcement
(Bracket-B)

9-4

Reinforcement
(Bracket-A)

9-2

Melt the 17 pins.
Precaution
*Melt the pins with a soldering
 iron to fix the earth shield.
 Finally check for loosenes.

9-8

M3 screw (4 locations)

9-5

Nut (4 locatons)

9-1