Read Sharp XV-Z12000 Handy Guide online
Lamp Replacement Procedure
Version 1.3
Issue 04/2006
Issue 04/2006
13
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1.
Connect the power cord.
•
Plug the power cord into the AC socket of the projector.
2.
Reset the lamp timer.
•
While holding the “ENTER”, “DOWN” and “RIGHT”,
press the “ON” key.
press the “ON” key.
•
“LAMP 0000H” is displayed, indicating that the lamp
timer is reset.
timer is reset.
Note
•
Make sure to reset the lamp timer only when replacing
the lamp. If you reset the lamp timer and continue to
use the same lamp, this may cause the lamp to
become damaged or explode.
the lamp. If you reset the lamp timer and continue to
use the same lamp, this may cause the lamp to
become damaged or explode.
•
You need to reset the lamp timer every time you
replace the lamp and confirm it is reset on the “Lamp
Timer” menu.
replace the lamp and confirm it is reset on the “Lamp
Timer” menu.
Click on the first or last page to see other XV-Z12000 service manuals if exist.