Read Sharp XV-Z12000 Handy Guide online
Lamp Replacement Procedure
Version 1.3
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
3.
Loosen the user service screw that secures
the lamp cage cover.
the lamp cage cover.
•
Loosen the user service screws that secure the lamp
unit cover. Then open the cover in the direction of the
arrow.
unit cover. Then open the cover in the direction of the
arrow.
4.
Remove the lamp unit.
•
Loosen the securing screws from the lamp unit. Hold the
lamp unit by the handle and pull it upwards.
lamp unit by the handle and pull it upwards.
5.
Insert the new lamp unit.
•
Press the lamp unit firmly into the lamp unit compartment.
Fasten the securing screws.
Fasten the securing screws.
6.
Replace the lamp unit cover.
Note
•
If the lamp unit lamp unit cover are not correctly
installed, the power will not turn on, even if the power
cord is connected to the projector.
installed, the power will not turn on, even if the power
cord is connected to the projector.
Click on the first or last page to see other XV-Z12000 service manuals if exist.