XV-Z12000 (serv.man35). Easy to use functions, appendix - Sharp Projector User Guide / Operation Manual. Page 31

Projector
XV-Z12000
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM
DTV480I/DTV480P/DTV720P/DTV1080I
DLP chip, RGB optical shutter method
Panel size: 0.8"
Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments
Drive method: Digital Light Processing (DLP™)
No. of dots: 921,600 dots (1,280 [H] 

× 720 [V])

1–1.35 

× zoom lens, F2.5–8, f = 32.5–44.0 mm

270 W SHP lamp
4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

RCA Connector (INPUT 1, 2)
Y: 1.0 Vp-p, sync negative, 75 

Ω  terminated

P

B

: 0.7 Vp-p, 75 

Ω  terminated

P

R

: 0.7 Vp-p, 75 

Ω  terminated

520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input)
DVI-I terminal: (INPUT 5)/RCA connector: INPUT 1/2
<Digital>
Input impedance

50 

Ω

Input level

250-1000 mV

<Analog>
Input Impedance

75 

Ω

Input level

0.7 Vp-p

<Synchronization signal>

••••• Separate sync / Composite sync

Input level

TTL level

Input impedance

1 K

Ω

••••• Green on sync

Input level (Synchronizing input)

0.286 Vp-p

Input Impedance

75 

Ω

RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
9-pin D-sub connector (RS-232C Port)
12–120 MHz
43–100 Hz
15–81 kHz
AC 100–240 V (HONG KONG: 220 V)
3.7 A (When using AC 100 V) / (HONG KONG: 1.6 A)
50/60 Hz (HONG KONG: 50 Hz)
365 W (HONG KONG: 345 W)
About 0.1 W (When using 100 V)
1,400 BTU/hour
+5°C to +35°C
–20°C to +60°C
Plastic
38 kHz
475 (W) 

× 178 (H) × 406 (D) mm (main body only)

475 (W) 

× 178 (H) × 496 (D) mm (including terminal cover)

9.4 kg
Remote control, Two AA size batteries, Power cord, DVI to 15-pin D-sub adaptor, 21-pin
RCA conversion adaptor, Video cable, Terminal cover, Lens cap (attached), SharpVision
Manager Software CD-ROM, Projector operation manual, SharpVision Manager operation
manual
Lamp unit (Lamp/cage module) (BQC-XVZ100005), Remote control (RRMCGA216WJSA), AA size
batteries, Power cord for Europe (except U.K.) and Korea: QACCVA011WJPZ, Power cord for U.K.,
Hong Kong and Singapore: QACCBA036WJPZ, Power cord for Australia and New Zealand:
QACCLA018WJPZ, DVI to 15-pin D-sub adaptor (QCNWGA010WJZZ), 21-pin RCA conversion adap-
tor (QSOCZ0361CEZZ), Video cable (QCNWGA001WJPZ), Lens cap (PCAPH1056CESA), Termi-
nal cover (CCOVA1985CE03),  SharpVision Manager Software CD-ROM (UDSKAA040WJZZ), Pro-
jector operation manuals; for European 7 languages (TINS-A972WJZZ (this manual)) / for Chinese,
Korean and Arabic (TINS-A973WJZZ), SharpVision Manager operation manual (TINS-B097WJZZ)

Product type

Model

Video system

Display method

DLP panel

Lens

Projection lamp

S-video input signal

Component input signal

Horizontal resolution

RGB input signal

Video input signal

Computer control signal

Pixel clock

Vertical frequency

Horizontal frequency

Rated voltage

Input current

Rated frequency

Power consumption (normal)

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

This SHARP projector uses a DMD Chip. This very sophis-
ticated panel contains 921,600 pixels. As with any high tech-
nology electronic equipment such as large screen TVs, video
systems and video cameras, there are certain acceptable
tolerances that the equipment must conform to.

This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture screen.
This will not affect the picture quality or the life expectancy
of the unit.

Specifications are subject to change without notice.

XV_Z12000E_E_p89_94.p65

03.10.27, 10:47 AM

91