Read Sharp XV-Z12000 (serv.man35) User Guide / Operation Manual online
-90
Check
Problem
Page
Troubleshooting
• Change the input signal type setting.
69
• The lamp indicator is blinking in red. Replace the lamp.
78
• Picture adjustments are incorrectly set.
47
• In the case of transmitting RS-232C commands from a computer
84
during standby, it takes a maximum of 30 seconds for the
computer to receive the response code. Set the response code
waiting time of the computer to 30 seconds or more.
computer to receive the response code. Set the response code
waiting time of the computer to 30 seconds or more.
Picture is green on
INPUT 1 or 2 COMPO-
NENT.
Picture is pink (no green)
on INPUT 1 or 2 RGB.
Picture is dark.
Picture is too bright and
whitish.
A response code cannot
be received when the
projector was attempted
to be controlled using
RS-232C commands
from a computer during
standby.
XV_Z12000E_E_p89_94.p65
03.10.27, 10:47 AM
90
Click on the first or last page to see other XV-Z12000 (serv.man35) service manuals if exist.