Read Sharp XV-Z12000 (serv.man33) User Guide / Operation Manual online
Connecting the Projector to Other Devices
Using as a Wired Remote Control
Connecting the Remote
Control to the Projector
Control to the Projector
When the remote control cannot be used due
to the range or positioning of the projector (rear
projection, etc.), connect a ø3.5 mm minijack
cable (commercially available or available as
Sharp service part QCNWGA038WJPZ) from
the WIRED R/C JACK on the top of the remote
control to the WIRED REMOTE control input
terminal.
to the range or positioning of the projector (rear
projection, etc.), connect a ø3.5 mm minijack
cable (commercially available or available as
Sharp service part QCNWGA038WJPZ) from
the WIRED R/C JACK on the top of the remote
control to the WIRED REMOTE control input
terminal.
ø3.5 mm minijack cable
(commercially available or
available as Sharp service
part QCNWGA038WJPZ)
(commercially available or
available as Sharp service
part QCNWGA038WJPZ)
To WIRED R/C JACK
To WIRED REMOTE control
input terminal
input terminal
Remote control
-26
XV_Z12000E_E_p15_26.p65
03.10.27, 10:41 AM
26
Click on the first or last page to see other XV-Z12000 (serv.man33) service manuals if exist.