Read Sharp XV-Z10E (serv.man29) Technical Bulletin online
PJR 2005 06 02
Date of Issue: 24
th
June 2005
Classification:
White
PROJECTOR TECHNICAL BULLETIN
Page 3 of 4
Sharp Electronics (UK) Limited
Reference - LP-006
Revision - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
9. Connect the mains lead to the projector and turn it on - software re-writing will start
automatically.
10. When writing is complete the window below will appear.
11. Click close.
Setting up after rewritting
After rewriting the software, it will be necessary to reset the language, eco mode etc.
1. Connect the projector and the PC via a RS232 cross connection cable.
2. Turn the projector on.
3. Enter the factory mode (with the menu not displayed, press, up, up, down, down,
2. Turn the projector on.
3. Enter the factory mode (with the menu not displayed, press, up, up, down, down,
right, left and enter buttons in sequence).
4. Reset data as noted down previously.
5. Select VERSION and press the enter key.
6. Check that the factory data has updated:
5. Select VERSION and press the enter key.
6. Check that the factory data has updated:
Click on the first or last page to see other XV-Z10E (serv.man29) service manuals if exist.