XV-Z10000 (serv.man29). Chapter 2 - Connection and setup - Sharp Projector User Guide / Operation Manual. Page 14

Read Sharp XV-Z10000 (serv.man29) User Guide / Operation Manual online

-28
90
°
90
°
Example of Standard Setup
Setting up the Screen
Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.
Note
The projector lens should be centred in the middle of the screen. If the horizontal line passing through the
lens centre is not perpendicular to the screen, the image will be distorted, making viewing difficult.
For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on
the screen washes out the colours, making viewing difficult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.
A polarizing screen cannot be used with this projector.
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screenaccording to the desired picture size. (See page
29.)
Screen size : 254cm (100 inches)
Aspect ratio : 16:9
Side View
Top View
The distance from the screen to the projector
may vary depending on the size of the screen.
P.29
The default setting can be used, when placing the
projector in front of the screen. If the projected im-
age is reversed or inverted, readjust the setting to
“Front” for “PRJ Mode” in the “Options” menu.
P.69
Place the projector so that an imaginary horizontal
line that passes through the centre of the lens is
perpendicular to the screen.
Audience
Setup
Page of 16
Display

Click on the first or last page to see other XV-Z10000 (serv.man29) service manuals if exist.