Read Sharp XV-Z10000 (serv.man29) User Guide / Operation Manual online
Connections and Setup
-23
Controlling the
Projector Using an
RS-232C Cable
Projector Using an
RS-232C Cable
When the RS-232C terminal on the projector
is connected to a computer with an RS-232C
cable (null modem, cross type, sold sepa-
rately), the computer can be used to control
the projector and check the status of the pro-
jector. See page 80 for details.
is connected to a computer with an RS-232C
cable (null modem, cross type, sold sepa-
rately), the computer can be used to control
the projector and check the status of the pro-
jector. See page 80 for details.
Connect the projector to the com-
puter using an RS-232C cable.
puter using an RS-232C cable.
Note
•
Do not connect or disconnect an RS-232C
cable to or from the computer while it is
on. This may damage your computer.
cable to or from the computer while it is
on. This may damage your computer.
•
The RS-232C function may not operate if
your computer terminal is not correctly set
up. Refer to the operation manual of the
computer for details.
your computer terminal is not correctly set
up. Refer to the operation manual of the
computer for details.
Optional
accessory
accessory
Desktop computer
To RS-232C terminal
RS-232C cable
(sold separately)
(sold separately)
RS-232C cable
Type: AN-C10RS (10.0m)
Type: AN-C10RS (10.0m)
Controlling the Projector by a Computer
Click on the first or last page to see other XV-Z10000 (serv.man29) service manuals if exist.