Read Sharp XV-Z100 Handy Guide online
Lamp Replacement Procedure
Version 1.1
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
3.
Remove the lamp unit cover.
•
Turn the projector over. Loosen the user service screw (1) that secures
the lamp unit cover. Pressing the tab, remove the lamp unit cover (2).
the lamp unit cover. Pressing the tab, remove the lamp unit cover (2).
4.
Remove the lamp unit.
•
Loosen the securing screws from the lamp unit. Hold the lamp
unit by the handle and pull it in the direction of the arrow.
unit by the handle and pull it in the direction of the arrow.
5.
Insert the new lamp unit.
•
Press the lamp unit firmly into the lamp unit compartment.
Fasten the securing screws.
Fasten the securing screws.
6.
Replace the lamp unit cover.
•
Align the tab on the filter/lamp unit cover (1) and place it while
pressing the tab (2) to close it. Then tighten the user service
screw (3) to secure the filter/ lamp unit cover.
pressing the tab (2) to close it. Then tighten the user service
screw (3) to secure the filter/ lamp unit cover.
Note
•
If the lamp unit and lamp unit cover is not correctly installed, the power will not turn on,
even if the power cord is connected to the projector.
even if the power cord is connected to the projector.
Click on the first or last page to see other XV-Z100 service manuals if exist.