Read Sharp XV-Z100 Handy Guide online
Lamp Replacement Procedure
Version 1.1
Issue 04/2006
Issue 04/2006
11
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Removing and Installing the Lamp Unit
Note
•
Ensure the lamp unit is
removed using the handle.
Ensure the glass surface of
the lamp unit or the insides of
the projector are not touched.
removed using the handle.
Ensure the glass surface of
the lamp unit or the insides of
the projector are not touched.
•
To avoid injury to yourself and
damage to the lamp, ensure
to carefully follow the steps
below.
damage to the lamp, ensure
to carefully follow the steps
below.
•
Do not loosen other screws except for the lamp unit cover and lamp unit. (Only the silver
screws are loosened).
screws are loosened).
1.
Press “STANDBY” on the projector to turn off the power.
•
Wait until the cooling fan stops.
Warning!
•
Do not remove the lamp unit from the
projector right after use. The lamp will be
very hot and may cause burn or injury.
projector right after use. The lamp will be
very hot and may cause burn or injury.
2.
Disconnect the power cord.
•
Unplug the power cord from the AC
socket.
socket.
•
Leave the lamp until it has fully cooled
down (about 1 hour).
down (about 1 hour).
Click on the first or last page to see other XV-Z100 service manuals if exist.