Read Sharp XR-20X Handy Guide online
Lamp Replacement Procedure
Version 1.1
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
5.
Insert the new lamp unit.
•
Press the lamp unit firmly into the lamp unit compartment.
Fasten the securing screws.
Fasten the securing screws.
6.
Replace the lamp unit cover.
•
Align the tab on the filter/lamp unit cover (1) and place it while
pressing the tab (2) to close it. Then tighten the user service
screw (3) to secure the filter/ lamp unit cover.
pressing the tab (2) to close it. Then tighten the user service
screw (3) to secure the filter/ lamp unit cover.
Note
•
If the lamp unit and filter/lamp unit cover is not correctly
installed, the power will not turn on, even if the power cord is
connected to the projector.
installed, the power will not turn on, even if the power cord is
connected to the projector.
Click on the first or last page to see other XR-20X service manuals if exist.