XG-XV2E (serv.man2). Service manual part one - Sharp Projector Service Manual (repair manual). Page 41

Read Sharp XG-XV2E (serv.man2) Service Manual online

41
XG-XV2E/M/A
TROUBLE SHOOTING TABLE 
(Continued)
Checking IC806 (3-D noise reduction circuit)
and its peripheral circuits
Yes
No
Check the buffer circuit of Q814 thru 
Q816 as well as Q903 thru Q905.
Yes
No
Are there signal outputs at pins (55)(Y 
signal) and (51)(chroma signal) of 
IC806?
Check IC806, IC807 (memory) and 
their peripheral circuits. 
Yes
No
Are there signal outputs at the 
emitters of Q817 (Y signal) and Q910 
(chroma signal)?
Check the low-pass circuit around 
Q817, Q907 and Q910.
Check IC816 and IC801 (RGB signal 
output circuit).
Are there signal inputs at pins (40)(Y 
signal) and (45)(chroma signal) of 
IC806?
Checking the chroma and Y signals of IC801
(RGB signal output)
Yes
No
Go to "Checking the video unit 
circuit".
Yes
No
Check the IC816 switching and their 
peripheral  circuits. If there is no 
signal at pins (8) and (16),  check the 
3-D noise reduction circuit (IC806).
No
Are there signal inputs at pins 
(20)(chroma signal) and (21)(Y signal) 
of IC801?
Check IC801 and its peripheral 
circuits. 
Check IC806 (3-D noise reduction 
circuit) and its peripheral circuits.
Go to "Checking IC801 (RGB signal 
output circuit)".
Yes
Are there signal inputs at pins (12)(Y 
signal) and (19)(chroma signal) of 
P402?
Are there output waveforms at pins 
(3)(chroma signal)  and (6)(Y signal) 
of IC816?
Page of 47
Display

Click on the first or last page to see other XG-XV2E (serv.man2) service manuals if exist.