XG-XV2E (serv.man2). Service manual part one - Sharp Projector Service Manual (repair manual). Page 40

Read Sharp XG-XV2E (serv.man2) Service Manual online

40
XG-XV2E/M/A
TROUBLE SHOOTING TABLE 
(Continued)
Checking the oscillation circuit
Yes
No
Check the +5V line, and IC408, IC801 
and their  peripheral circuits.
Yes
No
Are there oscillation waveform inputs 
at pin (4) of IC401 and IC402?
Check the oscillation of X401 and 
X402.
No
No
Is there oscillation waveform output 
at pin (1) of IC403? 14.31818 MHz 
for NTSC, and 17.73447 MHz for 
PAL and SECAM?
Check the level of 5-pin switch of 
IC403 and its peripheral parts.
Check the buffer circuit of Q428 thru 
Q430, and its peripheral circuits.
Yes
Are voltages at IC401 and IC402 as 
specified? Are there signal inputs at 
pins (6) and (7)?
Checking IC801 (RGB signal output circuit)
Yes
No
Check the data transfer and other 
performance at pins (17) and (18) of 
video IC801.
No
Go to "No color or unusual tone", 'No 
Y signal" or "Out of sync".
Yes
No
Are there output waveforms at the 
emitters of Q1501,  Q1502 and 
Q1503?
Check Q801 thru Q803 (buffer), 
IC1501 (amplifier),  IC1502 (RGB 
offset) and their peripheral circuits.
No
Are A/D outputs of IC1504, IC1505 
and IC1506 as specified?
Check the VCLK, IC1504, IC1505, 
IC1506 and their peripheral circuits.
Go to "Checking the PC circuit unit".
Yes
Are there RGB output waveforms at 
pins (31), (32) and (33) of IC801?
Is there oscillation waveform output at 
TP401?
Page of 47
Display

Click on the first or last page to see other XG-XV2E (serv.man2) service manuals if exist.