Read Sharp XG-V10XE (serv.man32) User Guide / Operation Manual online
57
Adjusting and
Controlling
Video Wall Setting
With this software, the image of the connected projectors can be divided
from 2
from 2
×
2 to up to 8
×
8 to create a video wall.
This function can not be available when the UXGA signal is displayed.
1
Click “Video Wall Setting” from the “Mode” menu.
You can also select “Video Wall” by clicking the
icon.
w
The
“Video Wall Setting”
window will open.
1
Area assigned to the selected projector
2
Select “Division” from 2
×
2, 3
×
3, 4
×
4, 5
×
5, 6
×
6, 7
×
7, 8
×
8,
4
×
3 (Wide screen) or 8
×
6 (Wide screen).
3
Select “Group Name”.
4
Projector selection area
5
Assign the projector.
6
Adjust: The position of the assigned projector can be adjusted in
the horizontal (H) and vertical (V) directions by clicking
'
,
"
,
\
and
|
.
2
Select the group.
3
Select “Division”.
4
Select the position to assign at “Position Assignment”.
For the relationship between the position assigned here and the
actual position of the projector, see “Projector image assignment
with the Video Wall Setting” on the following page.
actual position of the projector, see “Projector image assignment
with the Video Wall Setting” on the following page.
5
Select the projector at 4
4
4
4
4.
6
Press the “Assign” button.
The projector is assigned as a video wall component.
To fine-adjust the vertical and horizontal position, click
To fine-adjust the vertical and horizontal position, click
'
,
"
,
\
and
|
at “Adjust”.
1
6
3
2
4
5
Click on the first or last page to see other XG-V10XE (serv.man32) service manuals if exist.