Read Sharp XG-V10XE (serv.man32) User Guide / Operation Manual online
52
“Fine Sync” Adjustment
“Fine Sync”
adjustment is not necessary except “Auto Sync Setup”
and “Special Modes” with Input3 (DVI) mode (The “Input Adjust” and
“Settings”
“Settings”
items cannot be adjusted.).
1
to
4
: Slide the bar to the desired location or simply type in the desired
value in the box.
1
To make “Clock” adjustment
2
To make “Phase” adjustment
3
To make “H-POS” adjustment
4
To make “V-POS” adjustment
5
To reset all the adjustments
1
to
4
Press the “Reset” button.
6
Select the “Auto Sync Setup” ON/OFF.
“ON”
is for “Auto Sync” whenever the projector is powered or
the input signal is changed.
7
To select the “Special Modes”
8
To make “Auto Sync Display” ON/OFF.
“ON” is for displaying Background Image during “Auto Sync”.
9
To store up to seven adjustment settings for use with various
computers
Connect a PC to the projector and make the adjustments in “Input
Adjust”
Adjust”
. And then press one of the “Save No.” buttons to save
the adjustment setting.
●
Make a note of the “Save No.” and its stored setting, if necessary.
You cannot check each setting with this software after saving it.
You cannot check each setting with this software after saving it.
●
The previous setting will be overwritten if you save on the same
“Save No.”
“Save No.”
button.
0
To select the desired adjustment setting for the currently connected
PC, press the desired “Select No.” button.
Refer to
e
,
r
,
t
on
page 51
about the function of
q
,
w
,
e
on this
page.
1
2
3
4
5
2
3
4
5
q
w
9
0
e
6
7
8
Click on the first or last page to see other XG-V10XE (serv.man32) service manuals if exist.