Read Sharp XG-P25XE (serv.man35) User Guide / Operation Manual online
E-61
Multiple Function
Videowall
Using Extended Functionality Features
In the past, to setup a video wall, it was necessary to
purchase a costly image-processing device,
designed exclusively for the purpose.
The XG-P25X has built-in video wall capability that
doesn’t require additional expensive equipment.
purchase a costly image-processing device,
designed exclusively for the purpose.
The XG-P25X has built-in video wall capability that
doesn’t require additional expensive equipment.
Video wall is not compatible with resolutions higher than
SXGA.
SXGA.
Following is an example of how to build a 2X2 video wall
using 4 projectors as shown above.
using 4 projectors as shown above.
Install the supplied Sharp Advanced Presentation Software
Professional Edition in advance. For installation details,
refer to the guide for this software.
Professional Edition in advance. For installation details,
refer to the guide for this software.
Basic
Computer
RS-232C cable
RS-232C cable
RS-232C cable
RS-232C cable
ID Number : 001
ID Number : 002
ID Number : 003
ID Number : 004
Projector 1
Projector 2
Projector 3
Projector 4
RS-232C OUT
RS-232C IN
RS-232C OUT
RS-232C IN
RS-232C OUT
RS-232C IN
RS-232C OUT
RS-232C IN
1
Select the same RS-232C transmission speed for all
projectors.
(See page
projectors.
(See page
53
for details on selecting transmission
speed.)
2
Set the ID No. for each projector.
(See page
(See page
54
for details on setting the ID No.)
3
Turn off all the projectors.
4
Connect the computer with Sharp Advanced
Presentation Software Professional Edition to the 4
projectors using a RS-232C cable as the Connection
Diagram 1 below.
(See page
Presentation Software Professional Edition to the 4
projectors using a RS-232C cable as the Connection
Diagram 1 below.
(See page
20
for details on connecting RS-232C
cable.)
5
Turn on the computer, then launch Sharp Advanced
Presentation Software Professional Edition.
Presentation Software Professional Edition.
6
Select “Use ID Number” at the Operation Mode
Setting.
(See the Sharp Advanced Presentation Software
Professional Edition installation guide for setup
details.)
Setting.
(See the Sharp Advanced Presentation Software
Professional Edition installation guide for setup
details.)
7
Execute Scan at Scan Setting.
(See the Sharp Advanced Presentation Software
Professional Edition installation guide for details.)
(See the Sharp Advanced Presentation Software
Professional Edition installation guide for details.)
8
Click Power ON at the Multiple Control window.
If the projectors are connected and setup correctly, all
the projectors will turn on.
If power does not turn on, check connections and try
again.
If the projectors are connected and setup correctly, all
the projectors will turn on.
If power does not turn on, check connections and try
again.
9
Group the projectors at Group Setting.
(See the Sharp Advanced Presentation Software
Professional Edition installation guide for details.)
(See the Sharp Advanced Presentation Software
Professional Edition installation guide for details.)
10
Perform video wall setup at Video Wall Setting.
(See the Sharp Advanced Presentation Software
Professional Edition installation guide for setup
details.)
(See the Sharp Advanced Presentation Software
Professional Edition installation guide for setup
details.)
That completes video wall setup. When the same
image signal is input to all the projectors, video wall
projection starts.
image signal is input to all the projectors, video wall
projection starts.
Connection Diagram 1
Click on the first or last page to see other XG-P25XE (serv.man35) service manuals if exist.