XG-P25XE (serv.man34). Basic operation - Sharp Projector User Guide / Operation Manual. Page 11

• When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur,

switch to the video system of the source signal.

• AUTO cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-M and

PAL-N input signals.

The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode
if the selected system mode is not compatible with the connected audiovisual equipment.  See page

 for the procedure details.

All On-screen Display are displayed.

Input/Custom/Freeze/Enlarge/Auto sync/Volume/Mute/
Black screen functions are not displayed.

All On-screen Display are not displayed (except Menu/
Lens functions and warning display (Power off/Temp./
Lamp function etc.)).

This function allows you to turn on or off the on-screen messages that appear during input select.
See page 

 for the procedure details.