XG-P25XE (serv.man10). Convergence and focus adjustment - Sharp Projector Service Manual (repair manual). Page 4

With the top cabinet removed
(1) Disconnect the LCD flat cable from the output PWB connector.
(2) Remove the lock screws "b" and "c". Detach the R/B adjusting plate or the G adjusting plate together with the LCD

panel.

(3) Separate the LCD panel from the adjusting plate.
(4) Mount a new LCD panel in the reverse order of the above steps (1), (2) and (3).

~

Readjust the convergence and focus. Note that the G LCD panel needs no convergence adjustment and has
a small adjustment range in the Z direction.

G-LCD panel
mounting screws

Lock 
screws "c"

Lock screws "c"

Lock 
screws "b"

FRONT

2

2

2

B-LCD panel
mounting screws

Lock screws "c"

X

Z

θ

Y

X

Y

θ

Z

B adjusting plate

B-LCD

G-LCD

~

R-LCD

B-LCD

X

Z

θ

Y

3

G-LCD

G adjusting plate

3

2