XG-P20XE (serv.man21). Section 5 Multiple function, Section 6 Maintenance troubleshooting, Section 7 Appendix - Sharp Projector User Guide / Operation Manual. Page 17

Product type

Model

Video system

Display method

LCD panel

Standard Lens

Projection lamp

Contrast ratio

Video input signal

S-video input signal

Component input signal

Horizontal resolution

RGB input signal

Pixel clock

Vertical frequency

Horizontal frequency

Computer control signal

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power dissipation

Operating temperature

Storage temperature

Cabinet

GyroRemote

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

LCD Projector
XG-P20XE
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480P/720P/1080i
LCD panel 

 3, RGB optical shutter method

Panel size: 33 mm (1.3

) (20.0 [H]  26.6 [W] mm)

Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 786,432 dots (1,024 [H] 

 768 [V])

1–1.3 

 zoom lens, F1.7–2.3, f = 49.1–63.8 mm

AC 220 W lamp
400:1
RCA Connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω terminated

RCA Connector: AUDIO, 0.5 Vrms more than 22 k

Ω (stereo)

4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

BNC Connector (INPUT 2)
Y: 1.0 Vp-p, sync negative, 75 

Ω  terminated

P

B

: 0.7 Vp-p, 75 

Ω  terminated

P

R

: 0.7 Vp-p, 75 

Ω  terminated

520 TV lines (S-video input), 750 TV lines (DTV 720P input, STRETCH mode)
DVI 

CONNECTOR

 (29-

PIN

) (INPUT 3), RGB (DIGITAL), 250–1,000 mV, 50 

Ω

15-

PIN

 

MINI

 D-

SUB

 

CONNECTOR

 (INPUT 1), 5 BNC 

CONNECTOR

 (INPUT 2):

RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75 

Ω terminated

S

TEREO

 M

INIJACK

: AUDIO, 0.5 Vrms, more than 22 k

Ω (stereo)

H

ORIZONTAL

 

SYNC

. 

SIGNAL

: TTL level (positive/negative) or composite sync (Apple only)

V

ERTICAL

 

SYNC

. 

SIGNAL

: Same as above

12–230 MHz
43–200 Hz
15–126 kHz
9-pin D-sub connector (RS-232C Input Port/Output Port)
4.5 cm (1 

49

⁄

64

) round  2

2 W 

 2 W (stereo)

AC 100–240 V
3.95 A
50/60 Hz
330 W
< 1,250 BTU/hour

5°C to 40°C

20°C to 60°C
Plastic
RF carrier frequency: 49.825–49.895 MHz
Design field: 2,500 uV/m (at 3 m (9

 10))

Control range: 30 m (98

 5)

319.0 

 155.0  423.0 mm (12 

9

⁄

16

 (W)  6 

3

⁄

32

 (H)  16 

21

⁄

32

 (D)) (main body only)

322.5 

 188.5  438.0 mm (12 

11

⁄

32

 (W)  7 

27

⁄

64

 (H)  17 

15

⁄

64

 (D)) (including standard

lens, adjustment feet and projecting parts)
9.5 kg (main body only)
GyroRemote, Four AAA size batteries, Power cord (1.8 m), RGB cable (3 m), USB mouse
control cable (1 m), Computer audio cable (3 m), ø2.5–ø3.5 mm wired remote control
cable (15 cm), Three BNC-RCA adaptors, Extra air filter, Lens cap, CD-ROM, LCD
projector operation manual, LCD projector quick reference, Sharp Advanced Presentation
Software operation manual, ID number seal
Standard lens unit (CLNS-0236CE01), Lamp unit (Lamp/cage module) (BQC-XGP20X//1),
GyroRemote (RRMCG1653CESA), AAA size batteries, Power cord, RGB cable
(QCNW-5304CEZZ), USB mouse control cable (QCNW-5916CEZZ), Computer audio cable
(QCNW-4870CEZZ), ø2.5–ø3.5 mm wired remote control cable (QCNW-5943CEZZ), BNC-
RCA adaptors (QPLGJ0107GEZZ), Air filter (PFILD0080CEZZ), Lens cap
(PCAPH1056CESA), CD-ROM (UDSKA0045CEN1), LCD projector operation manual (TINS-
7403CEZZ), LCD projector quick reference (TINS-7404CEZZ, TINS-7405CEZZ), Sharp
Advanced Presentation Software operation manual (TINS-7407CEZZ), ID number seal
(TLABZ0781CEZZ)

This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 786,432 pixels (

 RGB) TFTs (Thin

Film Transistors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform
to.

This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.

Specifications are subject to change without notice.