Read Sharp XG-P20XE (serv.man18) User Guide / Operation Manual online
Setup & Connections
17
Watching Video Images
Connecting to a VCR, laser disc player and other audiovisual
equipment using the standard video Input
equipment using the standard video Input
S-video cable (sold separately)
Video cable (sold separately)
1
2
Audio cable (sold separately)
To S-video output terminal
To video output terminal
To audio output terminals
VCR
or
Laser disc player
Example
1
Connect the yellow RCA connectors to the corresponding yellow VIDEO INPUT 4 terminal on the projector and
the Video output terminal on the video source.
the Video output terminal on the video source.
2
To use the built-in audio system, connect the red and white RCA connectors to the corresponding reed and
white AUDIO INPUT 4/5 terminals on the projector and the Audio output terminals on the video source.
white AUDIO INPUT 4/5 terminals on the projector and the Audio output terminals on the video source.
The S-VIDEO INPUT 5 terminal uses a video signal system in which the picture is separated into a colour and a luminance
signal to realise a higher-quality image.
signal to realise a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT 5 terminal on the projector. S-video cable is sold separately.
• If your video equipment does not have an S-video output terminal, use a composite video cable.
• If your video equipment does not have an S-video output terminal, use a composite video cable.
CAUTION
• Always turn off the projector before connecting to video equipment, in order to protect both the projector and the equipment
being connected.
Click on the first or last page to see other XG-P20XE (serv.man18) service manuals if exist.