Read Sharp XG-P10XE (serv.man12) User Guide / Operation Manual online
42
Troubleshooting
Unable to transfer images or an error occurs with communication
H
Check that the connection type is surely selected as you intend
(page 32)
.
H
Check that the image size is 800
×
600 or lower.
H
Check that the port for the RS-232C serial cable is correctly specified
in the PC’s settings
in the PC’s settings
(page 32)
.
H
Check that the cable is correctly and securely connected
(page 6)
.
The functions in this software are not operating properly
H
Reconnect the RS-232C serial cable and try again.
The cable may not be connected properly or an error may have
occurred during the transmission.
The cable may not be connected properly or an error may have
occurred during the transmission.
H
Check that the port for serial (RS-232C) communications is correctly
specified in the PC’s settings
specified in the PC’s settings
(page 32)
.
H
Projector may not be receiving command because of the projector’s
setting. Please check the projector’s “ON/OFF” status, “INPUT
SELECT” status (COMPUTER, VIDEO) or the input signal. Resend
the command after adjusting these items.
setting. Please check the projector’s “ON/OFF” status, “INPUT
SELECT” status (COMPUTER, VIDEO) or the input signal. Resend
the command after adjusting these items.
H
Before Gamma Correction, use the projector’s Gamma button and
set the CUSTOM mode.
set the CUSTOM mode.
The transmitting speed is low
H
Check the compression rate setting
(page 33)
.
H
Check the transmission speed, in the case of RS-232C cable
communications
communications
(page 32)
.
H
Note that custom image as Startup Image and Background Image
is fixed in the “High quality, slow transmission” setting.
is fixed in the “High quality, slow transmission” setting.
H
Note that Quick Transfer is fixed in the “Normal quality, middle
speed” setting.
speed” setting.
Unable to save the startup image
H
Do not turn off the projector while transmission.
The image data may be lost.
The image data may be lost.
Click on the first or last page to see other XG-P10XE (serv.man12) service manuals if exist.