Read Sharp XG-NV6XE (serv.man13) User Guide / Operation Manual online
33
2
When “CUSTOM” is selected
in box
1
, each of these colours
except “WHITE” can be adjusted respectively. As you adjust
“WHITE”, the values of the other three colours will be offset.
“WHITE”, the values of the other three colours will be offset.
The “Reset & Transmit” button resets the values of the colour
currently selected. If you want to reset both the red and green
values, click the “Reset & Transmit” button in the “RED” mode,
and then click the “Reset & Transmit” button again in the
“GREEN” mode. If you want to reset to the original values, click
the “Reset & Transmit” button in the “WHITE” mode.
currently selected. If you want to reset both the red and green
values, click the “Reset & Transmit” button in the “RED” mode,
and then click the “Reset & Transmit” button again in the
“GREEN” mode. If you want to reset to the original values, click
the “Reset & Transmit” button in the “WHITE” mode.
3
Specify the source of the image. The default setting is
“COMPUTER”
“COMPUTER”
4
To send all the adjustment signals to the projector
2
Select the “Input Mode”.
3
Select “CUSTOM” or one of the other modes.
w
When selecting the “MOVIE”, “FAMILY”, “SNOW”, or “NIGHT”
mode, the “NOW TRANSMITTING...” message is displayed
during transmission.
mode, the “NOW TRANSMITTING...” message is displayed
during transmission.
4
When selecting “CUSTOM”, adjust the values of each
colour.
colour.
Drag and drop the curve of the graph to adjust it to the proper value.
5
Click “Transmit”.
w
The “NOW TRANSMITTING...” message is displayed during
transmission.
transmission.
Adjusting and
Controlling
Click on the first or last page to see other XG-NV6XE (serv.man13) service manuals if exist.