XG-NV21SE (serv.man3). Introduction and contents, , Removing of major parts - Page 1-14 - Sharp Projector Service Manual (repair manual). Page 10

1-1. Detach the Intake cover.
1-2. Remove the screw off the lamp cage cover and detach the lamp cage cover.
1-3. Remove the three lock screws off the lamp cage unit and detach the lamp cage unit.
1-4. Remove the lock screw from the lens cover. Turn the lens cover clockwise or counterclockwise and detach it.
Notes:

»

Before the replacement, turn off the projector’s power button, make sure the cooling fan comes to a complete
stop, and unplug the power cord.

»

The lamp may be still very hot. Turn off the power button, unplug the power cord and wait for at least 1 hour
before staring the job.

»

In fitting the lamp cage unit back into position, make sure the connector is at the top position.

1-4

1-1

1-3

1-2

Lens Cover

Intake Cover

Lamp Cage Cover

Lamp Cage Unit