Read Sharp XG-MB67X Specification online
XG-MB67X
1 – 1
XG-MB67X
Service Manual
CHAPTER 1.
SPECIFICATIONS
[1] SPECIFICATIONS
Product type
Projector
Model
XG-MB67X
Video system
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/DTV540P/
DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50
DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50
Display method
Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments
DMD panel
Panel size: 0.55" (14 mm), 1chip XGA DMD
No. of dots: 786,432 dots (1,024 [H] x 768 [V])
No. of dots: 786,432 dots (1,024 [H] x 768 [V])
Lens
1–1.15 x zoom lens, F2.4–2.6, f = 18.7–21.5 mm
Projection lamp
300 W DC lamp
Component input signal
15-pin mini D-sub connector
(INPUT1/2)
Y: 1.0 Vp-p, sync negative, 75
Ω terminated
PB: 0.7 Vp-p, 75
Ω terminated
PR: 0.7 Vp-p, 75
Ω terminated
Horizontal resolution
600 TV lines (DTV720P)
Computer RGB input
15-pin mini D-sub connector
(INPUT 1/2)/output
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
Ω terminated
(OUTPUT) signal
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
VERTICAL SYNC. SIGNAL: Same as above
S-video input signal
4-pin mini DIN connector
(INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω terminated
Video input signal
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
Ω
(INPUT 4)
terminated
Vertical frequency
45–85 Hz
Horizontal frequency
15–70 kHz
Pixel clock
12–108 MHz
RS-232C terminal
9-pin mini DIN connector
LAN terminal
8-pin RJ-45 modular connector
Audio input signal
φ3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 kΩ (stereo)
Audio output signal
φ3.5 mm minijack: 0.5 Vrms, less than 2.2 kΩ
(AUDIO OUTPUT 1-4)
Speaker system
4 cm x 2.85 cm oval x 1
Rated voltage
AC 110–240 V
Input current
3.6 A
Rated frequency
50/60 Hz
Power consumption
385 W (Lamp Setting “Bright”)/
308 W (Lamp Setting “Eco + Quiet”) with AC 110 V
367 W (Lamp Setting “Bright”)/
300 W (Lamp Setting “Eco + Quiet”) with AC 240 V
308 W (Lamp Setting “Eco + Quiet”) with AC 110 V
367 W (Lamp Setting “Bright”)/
300 W (Lamp Setting “Eco + Quiet”) with AC 240 V
Power consumption (standby)
4.7 W (AC 110 V) – 5.6 W (AC 240 V)
Heat dissipation
1,450 BTU/hour (Lamp Setting “Bright”)/
1,160 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 110 V
1,380 BTU/hour (Lamp Setting “Bright”)/
1,130 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V
1,160 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 110 V
1,380 BTU/hour (Lamp Setting “Bright”)/
1,130 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V
Operating temperature
41
°F to 95°F (+5°C to +35°C)
Storage temperature
–4
°F to 140°F (–20°C to +60°C)
Cabinet
Plastic
I/R carrier frequency
38 kHz
Dimensions (approx.)
12 13/32" x 4 19/64" x 11 1/32" (315 (W) x 109 (H) x 280 (D) mm) (main body only)
12 13/32" x 4 47/64" x 11 37/64" (315 (W) x 120 (H) x 294 (D) mm) (including adjustment
foot and projecting parts)
12 13/32" x 4 47/64" x 11 37/64" (315 (W) x 120 (H) x 294 (D) mm) (including adjustment
foot and projecting parts)
Weight (approx.)
8.6 lbs. (3.9 kg)
Replacement parts
Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe, except U.K.,
Power cord for U.K. and Singapore, Power cord for Australia, New Zealand and Oceania, RGB
cable, DIN-D-sub RS-232C adaptor, Operation manual (Printed and CD-ROM)
Power cord for U.K. and Singapore, Power cord for Australia, New Zealand and Oceania, RGB
cable, DIN-D-sub RS-232C adaptor, Operation manual (Printed and CD-ROM)
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement with-
out prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these
values in individual units.
out prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these
values in individual units.
Display
