Read Sharp XG-C50XE (serv.man35) Driver / Update online
77
Adjusting and
Controlling
Single
The “Reset & Transmit” button resets the values of the color
currently selected. If you want to reset both the red and green
values, click the “Reset & Transmit” button in the “RED” mode,
and then click the “Reset & Transmit” button again in the
“GREEN” mode. If you want to reset to the original values, click
the “Reset & Transmit” button in the “WHITE” mode.
currently selected. If you want to reset both the red and green
values, click the “Reset & Transmit” button in the “RED” mode,
and then click the “Reset & Transmit” button again in the
“GREEN” mode. If you want to reset to the original values, click
the “Reset & Transmit” button in the “WHITE” mode.
3
To restore to the previous status after operating the gamma data.
4
To restore the status before the “UNDO” button was clicked.
5
To send all the adjustment signals to the projector
6
Gamma coordinate display (INPUT/OUTPUT)
2
Select the “InputMode”.
3
Adjust the values of each color.
Drag and drop the curve of the graph to adjust it to the proper value.
4
Click “Transmit”.
| The “Now Transmitting...” message is displayed during
transmission.
Click on the first or last page to see other XG-C50XE (serv.man35) service manuals if exist.