PG-MB60X (serv.man31). Setup, Connections, Basic operation - Sharp Projector User Guide / Operation Manual. Page 2

■ Place a translucent screen between the projector and the audience.

■ Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 

.)

■ Place a mirror (normal flat type) in front of the lens.

■ When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”

menu. (See page 

.)

■ When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page 

.)

• When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected

light does not shine into the eyes of the audience.

■ It is recommended that you use the optional Sharp ceiling-mount

bracket for this installation.
Before mounting the projector, contact your nearest Sharp Au-
thorized Projector Dealer or Service Center to obtain the recom-
mended ceiling-mount bracket (sold separately).
• AN-MBCM10 ceiling-mount bracket, its AN-EP101B extension

tube and AN-JT200 universal bracket, adaptor for non-level
ceiling installation (for U.S.A.).

• AN-60KT ceiling-mount bracket, its AN-TK201 and AN-TK202

extension tubes (for countries other than the U.S.A.).

■ Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See

page 

 for use of this function.

Translucent screen

Audience

Audience

Translucent screen

Mirror

Audience

Mirror