Read Sharp PG-M25XE Handy Guide online
Lamp Replacement Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
13
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1.
Connect the power cord.
•
Plug the power cord into the AC socket of the projector.
2.
Reset the lamp timer.
•
While pressing simultaneously “ADJ DOWN”, “VOL +” and
“ENTER” on the projector, press “POWER”.
“ENTER” on the projector, press “POWER”.
•
“LAMP 0000H” is displayed, indicating that the lamp timer
is reset.
is reset.
Note
•
Make sure to reset the lamp timer only when replacing the
lamp. If you reset the lamp timer and continue to use the
same lamp, this may cause the lamp to become damaged
or explode.
lamp. If you reset the lamp timer and continue to use the
same lamp, this may cause the lamp to become damaged
or explode.
Click on the first or last page to see other PG-M25XE service manuals if exist.