PG-M25XE (serv.man32). Appendix - Sharp Projector User Guide / Operation Manual. Page 18

Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
select six different modes: NORMAL, FULL, DOT
BY DOT, BORDER, STRETCH and SMART
STRETCH.

Projects the image fully in a 16:9 screen by en-
larging only the surrounding areas while keeping
the aspect ratio in the middle part of the image at
4:3.

An international standard of color reproduction
regulated by the IEC (Inter national
Electrotechnical Commission). As the fixed color
area has been decided by the IEC, the color
changes according to DLP features, so that the
images are displayed in a natural tint based on
an original image, when switching to the “sRGB”
mode.

Stands for Service Set ID. Name for identifying
“Groups” of devices connected to a wireless LAN.
Wireless data transmissions can be done only with
devices that carry the same SS ID (group name).
You can set any desirable SS ID using a
combination of alphanumeric characters or
symbols (max. 32 characters).

The image displayed when the projector is turned
on.

Displays the settings of each adjustment item.

Mode that stretches the 4:3 image horizontally to
display it fully on a 16:9 screen.

A parameter used on a TCP/IP network, that is
used when an IP address is separated into net-
work address and host address.

A wireless channel is a frequency used by wire-
less LAN cards in wireless communications. If
other wireless LAN networks are in use near the
location of the projector, make sure that different
channels have been set on both the projector and
the wireless LAN so as to avoid interference.