PG-M25XE (serv.man32). Appendix - Sharp Projector User Guide / Operation Manual. Page 13

Digital Multimedia Projector
PG-M25X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV720P/DTV1080I
Single Chip Digital Micromirror Device™ (DMD™) by Texas Instruments
Panel size: 0.7" (17.8 mm), 1 chip XGA DMD
No. of dots: 786,432 dots (1,024 [H] 

× 768 [V])

1–1.2 

× zoom lens, F1.75–2.04, f = 28.0–33.5 mm

High Intensity Discharge Lamp (HID Lamp), DC 210 W
29-pin connector
DVI input signal: Digital 250–1,000 mV 50 

Ω

Analog 0.7 Vp-p 75 

Ω

Y: 1.0 Vp-p, sync negative, 75 

Ω terminated

P

B

: 0.7 Vp-p, 75 

Ω terminated

P

R

: 0.7 Vp-p, 75 

Ω terminated

700 TV lines (DTV720P)
29-pin connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 

Ω terminated

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
12–230 MHz
43–200 Hz*
15–126 kHz
ø3.5 mm M

INIJACK

: AUDIO, 0.5 Vrms, more than 47 k

Ω (stereo)

PCMCIA-TYPE II
2.0 W (monaural)
4 cm 

× 3 cm

AC 100–240 V
3.2 A
50/60 Hz
295 W
1,110 BTU/hour
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
49.825 – 49.895 MHz (for U.S., Canada etc.),
40.667 – 40.695 MHz (for Europe, Oceania, Asia)
8 

5

⁄

8

" 

× 3" × 11 

15

⁄

16

" (219 (W) 

× 76 (H) × 303 (D) mm) (main body only)

8 

3

⁄

4

" 

× 3 

1

⁄

4

" 

× 12 

1

⁄

2

" (223 (W) 

× 83 (H) × 318 (D) mm) (including adjustment feet

and projecting parts)
5.8 lbs. (2.6 kg)
GyroRemote, Four R-03 batteries, Power cord  (6', 1.8 m), Two wireless LAN PC cards, DVI to
15-pin D-sub cable (6', 1.8 m), USB cable (6', 1.8 m), Carrying case, Lens cap (attached), Lens
cap strap, Terminal cover (attached), CD-ROM, Projector operation manual, Quick reference
guides, Wireless Reality software operation manual, Wireless LAN PC Card operation manual.

Lamp unit (Lamp/cage module) (BQC-PGM20X//1), GyroRemote for U.S., Canada etc.
(RRMCG1631CESA), GyroRemote for Europe, Australia, Oceania and Asia (RRMCG1653CESA),
Four R-03 batteries (“AAA” size, UM/SUM-4, HP-16, or similar), Power cord for U.S., Canada etc.
(QACCDA007WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power cord for
U.K. and Hong Kong (QACCB5024CENA), Power cord for Australia, New Zealand and Oceania
(QACCL3022CEZZ), DVI to 15-pin D-sub cable (QCNWGA010WJZZ), USB cable
(QCNWG0001WJPZ), Wireless LAN PC card AN-WC11B (RUNTKA025WJZZ), Carrying case
(GCASN0005CESA), Lens cap (CCAPHA001WJ01), Lens cap strap (UBNDT0013CEZZ), Ter-
minal cover (GCOVD0103CESA), CD-ROM (UDSKAA001WJZZ), Projector operation manual
(TINS-A046WJZZ), Quick reference guides, Wireless Reality software operation manual (TINS-
A049WJZZ), Wireless LAN PC Card operation manual (TINS-A306WJZZ).

Product type

Model

Video system

Display method

DMD panel

Lens

Projection lamp

Component input signal

(INPUT1)

Horizontal resolution

Computer RGB input signal

(INPUT 1)

S-video input signal

(INPUT 2)

Video input signal

(INPUT 3)

Pixel clock

Vertical frequency

Horizontal frequency

Audio input signal

PC card slot (INPUT 4)

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Heat dissipation

Operating temperature

Storage temperature

Cabinet

GyroRemote Radio Frequency Range

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

This SHARP projector uses a DMD panel. This very so-
phisticated panel contains 786,432 pixels. As with any high
technology electronic equipment such as large screen TVs,
video systems and video cameras, there are certain ac-
ceptable tolerances that the equipment must conform to.

* Temporary noise  may be visible with vertical frequencies above 100Hz if OSD functions  are  activated.

Specifications are subject to change without notice.

This unit has some inactive pixels within acceptable
tolerances which may result in inactive dots on the
picture screen. This will not affect the picture quality
or the life expectancy of the unit.