PG-M25XE (serv.man30). Basic operation - Sharp Projector User Guide / Operation Manual. Page 3

"On-screen Display (Example)

Using
Analog RGB

Using
Component

• Each press switches in the following

order:

→ INPUT 1 → INPUT 2 → INPUT 3 → INPUT 4

• You can also use the 

 on the

GyroRemote.

Note

• When no signal is received, “NO SIG-

NAL” will be displayed. When a signal
that the projector is not preset to
receive is input, “NOT REG.” will be
displayed.

• When Auto Search is ON, the input

modes with signals can be selected
(See 

.)

• When a PC card is inserted, the input

will automatically change to INPUT 4.

• You can select the input mode directly

by using the Button Assign function
on the GyroRemote (See 

Used for projecting images
from equipment that sends
RGB signals or Component
signals connected to the DVI-
DIGITAL/ANALOG input port.
Used for projecting images
from equipment connected to
the S-VIDEO input terminal.
Used for projecting images
from equipment connected to
the VIDEO input terminal.
When projecting from a wire-
less LAN PC card or a
memory card.

INPUT 1
(RGB/
Component)

INPUT 2
(S-Video)

INPUT 3
(Video)

INPUT 4
(PC Card)

Note

• Pressing “+” will raise the volume.

Pressing “–” will lower the volume.

• On the GyroRemote, the volume can

be adjusted by pressing 

.

• When a PC card is installed, 

 , 

on the projector or 

 on the

GyroRemote operate as cursor
buttons (\, |) when the OSD menu
is active.

Using
DVI digital

   Using S-Video

   Using Video

Memory card installed

• Transmission will be stopped if the input

is switched when a wireless LAN PC
card is installed in INPUT 4 and the
projector is connected to a computer.