Read Sharp PG-M20X (serv.man36) Technical Bulletin online
LV064
Sharp Electronics (UK) Ltd., Technical Services Group
3. Updating the firmware
3-1. Select “IPL2” in the “SPECIAL” mode, and then press the ENTER button.
3-2. The lamp of the projector goes to off and the projector starts cooling. Wait for
about 60 seconds and then disconnect the power cord.
3-3. Insert the memory card to the INPUT 4 PC card slot of the projector.
3-4. Connect the power cord.
3-5. The LAMP indicator blinks in green. The firmware updating gets started.
3-4. Connect the power cord.
3-5. The LAMP indicator blinks in green. The firmware updating gets started.
Note: Never turn off the power during updating period.
3-6. If the LAMP indicator is lighted up in red, the firmware updating is completed.
3-7. Disconnect the power cord and then remove the memory card from the projector.
Click on the first or last page to see other PG-M20X (serv.man36) service manuals if exist.