Read Sharp PG-M10XE (serv.man11) Technical Bulletin online
LV058
Sharp Electronics (UK) Ltd., Technical Services Group
A/D CONVERTER INITIALISING PROCEDURE
Note: Initialising of the data of A/D converter is needed after re-writing
Equipment needed:
DOS/V compatible PC with Window95 after ORS2 or Windows98 or Windows98SE
RS-232C cable (9FU911302320)
DOS/V compatible PC with Window95 after ORS2 or Windows98 or Windows98SE
RS-232C cable (9FU911302320)
1) Preparation before re-writing the software
a. Connect one end of the RS232C cable to the projector and connect other end to the
a. Connect one end of the RS232C cable to the projector and connect other end to the
serial port of the PC.
b. Turn on the power of the projector
2) U3 Default Ver2.3 (Application program for the A/D converter initialising) startup
a. Startup (Double-click) the "U3Default_English"
a. Startup (Double-click) the "U3Default_English"
b. The window below will then appear.
c. Set the "Baud" and"Comm" according to the PC's setting.
c. Set the "Baud" and"Comm" according to the PC's setting.
Click on the first or last page to see other PG-M10XE (serv.man11) service manuals if exist.