Read Sharp PG-M10SE (serv.man22) Technical Bulletin online
LV058
Sharp Electronics (UK) Ltd., Technical Services Group
a. Confirm that the status is“13845.547”, after rewriting the firmware
b. Make a reset in each “RGB”, “VIDEO”, “S-VIDEO” and “Y Pb Pr” mode.
b. Make a reset in each “RGB”, “VIDEO”, “S-VIDEO” and “Y Pb Pr” mode.
Method of reset:
After selecting the mode, select “RESET” and double-press “ENTER” key on the
back of remote control.
After selecting the mode, select “RESET” and double-press “ENTER” key on the
back of remote control.
The rewriting of firmware is completed.
Next, initialise the data of A/D converter according to the attachement-2 of LV-
058.
Next, initialise the data of A/D converter according to the attachement-2 of LV-
058.
d. Click “Read” button and the PC will read projector’s setting.
e. Check that the Status(firmware version).
e. Check that the Status(firmware version).
In case of PG-M10SU/PG-M10SE: “SVGA : 13945.547”
In case of PG-M10XU/PG-M10XE: “XGA : 13845.547”
If the PC will not start reading the projector’s setting even if you click
“Read” button, check the “Baud” and “Comm” setting again.
In case of PG-M10XU/PG-M10XE: “XGA : 13845.547”
If the PC will not start reading the projector’s setting even if you click
“Read” button, check the “Baud” and “Comm” setting again.
Click on the first or last page to see other PG-M10SE (serv.man22) service manuals if exist.