Read Sharp PG-C45X Handy Guide online
Adjustment of the Mirrors
Version 1.5
Issue 04/2006
Issue 04/2006
46
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Adjusting the mirrors
This adjustment is needed when any of the optical parts of the optical mechanism has been
replaced.
1. Disconnect the flat cables from all the LCD panels.
2. Light up the lamp.
3. Project a white-light image and check to see if there is any colour tint in any direction. If
any, use the M2, M4 and M5 adjusting levers.
4. Loosen the adjusting lever lock screws, make adjustments, and tighten up the lock screws.
replaced.
1. Disconnect the flat cables from all the LCD panels.
2. Light up the lamp.
3. Project a white-light image and check to see if there is any colour tint in any direction. If
any, use the M2, M4 and M5 adjusting levers.
4. Loosen the adjusting lever lock screws, make adjustments, and tighten up the lock screws.
Click on the first or last page to see other PG-C45X service manuals if exist.