Read Sharp PG-C45X (serv.man35) Driver / Update online
76
Single
Adjusting Images
Gamma Correction
Changing the gamma value adjusts the tone of an image on the screen.
This function is only available in the “Single Projector Operation Mode”.
Before Adjusting
● Use the projector’s Gamma button to set the CUSTOM mode.
● Infrared communications (IrCOM) cannot be used when performing
gamma correction. Connect a serial cable or LAN cable to the projector
and the PC (
and the PC (
page 10
), then proceed to Gamma Correction.
1
Select the “
Gamma Correction
” mode.
See section “Opening Modes” (
page 20
).
| The “Gamma Correction” window will open.
1
Specify the source of the image. The default setting is
“COMPUTER”
“COMPUTER”
2
Each of these colors except “WHITE” can be adjusted respectively.
As you adjust “WHITE”, the values of the other three colors will be
offset.
As you adjust “WHITE”, the values of the other three colors will be
offset.
2
6
5
3
4
1
4
1
Click on the first or last page to see other PG-C45X (serv.man35) service manuals if exist.