Read Sharp PG-C30XE Handy Guide online
Maintenance Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
15
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Replacing the Air Filter
•
This projector is equipped with air filters to
ensure the optimal operating condition of
the projector.
ensure the optimal operating condition of
the projector.
•
The air filters should be cleaned every 100
hours of use. Clean the filters more often
when the projector is used in a dusty or
smoky location.
hours of use. Clean the filters more often
when the projector is used in a dusty or
smoky location.
•
Ask your nearest Sharp Authorised Projector Dealer or Service Centre to exchange the
filter (PFILDA0076CEZZ) when it is no longer possible to clean.
filter (PFILDA0076CEZZ) when it is no longer possible to clean.
1.
Turn off the power and disconnect the power cord.
•
Press “OFF”. Wait until the cooling fan stops.
2.
Remove the bottom filter cover.
•
Turn over the projector. Grab the tab and open the filter
cover in the direction of the arrow.
cover in the direction of the arrow.
3.
Remove the air filter.
•
Pick the air filter up with your fingers and lift it out of the filter
cover.
cover.
Click on the first or last page to see other PG-C30XE service manuals if exist.