Read Sharp PG-C30XE Handy Guide online
Lamp Replacement Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
5.
Remove the lamp unit.
•
Loosen the securing screws from the lamp unit. Hold
the lamp unit by the handle and pull it in the direction
of the arrow.
the lamp unit by the handle and pull it in the direction
of the arrow.
6.
Insert the new lamp unit.
•
Press the lamp unit firmly into the lamp unit compartment.
Fasten the securing screws.
Fasten the securing screws.
7.
Attach the lamp unit cover.
•
Insert the tab of the lamp unit cover into the opening, and
press the cover until it clicks in place.
press the cover until it clicks in place.
Note
•
If the lamp unit and lamp cover are not correctly installed,
the power will not turn on, even if the power cord is
connected to the projector.
the power will not turn on, even if the power cord is
connected to the projector.
Click on the first or last page to see other PG-C30XE service manuals if exist.