Read Sharp PG-C30XE (serv.man14) User Guide / Operation Manual online
40
3
Select “Image Transfer” and click “OK”.
If you want to change the compression rate, see the section
“Changing Compression Rate”
“Changing Compression Rate”
(page 33)
.
●
For the details of the “Custom Image Transfer”,
see page 34
.
●
Changing the compression rate will change the image picture
quality and transfer speed.
quality and transfer speed.
On the projector side, the screen is automatically set to the CUSTOM
mode.
mode.
4
Click the “Capture & Transfer” button in the “Capture &
Transfer” window.
Transfer” window.
w
The “Capture & Transfer” window disappears and capturing
begins.
begins.
w
After capturing is completed, the “Capture & Transfer” window
reappears and transfer of the captured image begins.
reappears and transfer of the captured image begins.
w
The “Transmitted File Information” dialog box appears.
If you want to stop the transfer, click “CANCEL”.
If you want to stop the transfer, click “CANCEL”.
To send another image
Change the displayed image on the PC monitor and then repeat step 4.
Quick Transfer
Applying the preset compression rate, this mode allows you to transfer
images by simple steps.
images by simple steps.
This mode transfers images under the following settings which cannot
be modified.
be modified.
•
Normal picture quality
•
Compression rate: Middle
The custom image used as Startup Image and Background Image
cannot be transferred in this mode.
cannot be transferred in this mode.
Before Presentation
●
Confirm that the “Auto-Launch” setting is “ON”
(page 14)
and that
the software is active.
●
Connect a projector with the PC by using RS-232C cable.
●
Specify the projector model to which you will transfer images
(page 32)
.
●
This function is available for full screen slides (e.g. the “Slide Show”
mode of Microsoft PowerPoint).
mode of Microsoft PowerPoint).
Click on the first or last page to see other PG-C30XE (serv.man14) service manuals if exist.