Read Panasonic CQ-C1303NE Service Manual online
General
Power Supply
DC 12V (11V - 16V),
Test Voltage 14.4V
Negative Ground
Tone Controls
Bass ; ±12dB at 100Hz
Treble ; ±12dB at 10kHz
Current Consumption
Less than 2.2A (CD play mode,
0.5W×4ch)
0.5W×4ch)
Maximum Power Output
50W×4ch (at 1kHz, Vol. Max.)
Suitable Speaker Impedance
4-8
Ω
Pre-Amp Output Voltage
2.5V (CD play mode; 1kHz, 0dB)
Output Impedance
200
Ω
FM Stereo Radio
Frequency Range
87.5 - 108MHz
Usable Sensitivity
11.0dBf (1.25µV, 75
Ω
)
AM Radio
Frequency Range
531 - 1,602kHz
CQ-C1303NE
Removable Front Panel CD Player /
Receiver
Receiver
Usable Sensitivity
28dB/µV (25µV, S/N 20dB)
RDS
RDS Sensitivity
22dB/µV
CD Player
Sampling Frequency
8 times oversampling
Pick-Up Type
Astigma 3-beam
Light Source
Semiconductor Laser
Wavelength
780nm
Frequency Response
20Hz to 20,000Hz (±1dB)
Signal to Noise Ratio
96dB
Dimensions**
178×50×155mm
Weight**
1.4kg
* Specifications and the design are subject to possible modification
without notice due to improvements.
without notice due to improvements.
** Dimensions and Weight shown are approximate.
AUTOMOTIVE AFTERMARKET
Specifications*
Order No. ACED051211C8
1
ABOUT LEAD FREE SOLDER (PbF)
2
2
FEATUERS
2
3
REPLACEING THE FUSE
2
4
MAINTENANCE
2
5
NOTES
2
6
LASER PRODUCTS
2
7
DIMENSIONS
3
8
WIRING CONNECTION
4
9
BLOCK DIAGRAM
5
10 TERMINALS DESCRIPTION
6
1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
stamp on the PCB.
Caution :
•
•
•
•
Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
solder; Typically the melting point is 50 - 70°F (30 -
40°C)
higher.
Please
use
a
soldering
iron
with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
•
•
•
•
Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
(about 1100°F/600°C)
•
•
•
•
This lead free solder will be used for the products after
serial No. 1,000,001.
serial No. 1,000,001.
2 FEATUERS
•
•
•
•
Remote Control.
•
•
•
•
18-FM, 6-AM presets with preset scan
•
•
•
•
Digital servo for reliable CD playback.
•
•
•
•
Removable face plate.
3 REPLACEING THE FUSE
Use fuses of the same specified rating (15A). Using different
substitutes or fuses with higher ratings, or connecting the
product directly without a fuse, could cause fire or damage to
the stereo unit.
substitutes or fuses with higher ratings, or connecting the
product directly without a fuse, could cause fire or damage to
the stereo unit.
4 MAINTENANCE
Your products is designed and manufactured to ensure a
minimum of maintenance. Use a dry, a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
minimum of maintenance. Use a dry, a soft cloth for routine
exterior cleaning. Never use benzine, thinner or other solvents.
5 NOTES
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the
block is necessary, it will be supplied already aligned at the
11 PACKAGE AND IC BLOCK DIAGRAM
9
12 REPLACEMENT PARTS LIST
13
13 EXPLODED VIEW (Unit)
18
14 CD PLAYER MECHANICAL PARTS LIST
19
15 EXPLODED VIEW (CD Deck)
20
16 WIRING DIAGRAM
21
17 SCHEMATIC DIAGRAM-1
25
18 SCHEMATIC DIAGRAM-2
27
19 SCHEMATIC DIAGRAM for printing with A4 size
29
factory.
[CD DECK BLOCK]
This
model
has
no
servo
alignment
points
because
microcomputer controls the servo circuit.
6 LASER PRODUCTS
CONTENTS
Page
Page
2
CQ-C1303NE
7 DIMENSIONS
3
CQ-C1303NE
8 WIRING CONNECTION
4
CQ-C1303NE