Read Sharp PG-C20XE (serv.man3) Service Manual online
10
XV-Z7000
PG-C20X
PG-C20X
SUPPLEMENT
2-7. STEP 1 TAKING PICTURES
Using the digital camera, capture images that are projected onscreen.
Send a shooting pattern display command from the computer to the projector.
Arrange a specified number of pictures in the order of shooting. On the digital camera’s files, the pictures
are usually numbered in the shooting order. Be careful not to confuse those numbers.
Here are the steps to take.
Send a shooting pattern display command from the computer to the projector.
Arrange a specified number of pictures in the order of shooting. On the digital camera’s files, the pictures
are usually numbered in the shooting order. Be careful not to confuse those numbers.
Here are the steps to take.
1. Connect the RS232C cable between the projector and the computer.
Make the following settings of the projector (for the best correction results).
Model
XV-Z7000 series
PG-C20X series
Input mode
VIDEO
INPUT 1 (RGB)
Color temperature
Position 3
─
Theater mode
(Power-save mode)
OFF
OFF
Adjustment-menu items
All at STANDARD
AUTO POWER OFF
OFF
PRECAUTIONS
Do not run this program while the projector is getting started or while the images are
being adjusted.
Do not use the program either while the INPUT 1 or other mode is being displayed
onscreen.
Start the program, making sure there is nothing displayed onscreen.
being adjusted.
Do not use the program either while the INPUT 1 or other mode is being displayed
onscreen.
Start the program, making sure there is nothing displayed onscreen.
If you start the program with anything displayed onscreen, the pattern may fail to appear.
2. Select the projector model number in question.
Click on the first or last page to see other PG-C20XE (serv.man3) service manuals if exist.