Read Sharp PG-C20XE (serv.man3) Service Manual online
5
XV-Z7000
PG-C20X
PG-C20X
SUPPLEMENT
2-3. SETTING A DIGITAL CAMERA
The following digital cameras are recommended for this program. (Performance proven)
SHARP VN-EZ5/VN-EZ5EW (Internet ViewCam)
SHARP VL-MX1/VL-ME100S/VL-ME100E (Digital Video Camera)
SHARP VL-MX1/VL-ME100S/VL-ME100E (Digital Video Camera)
Other cameras than mentioned above may also be used. Refer to “2-14. DIGITAL CAMERA
SPECIFICATIONS”.
SPECIFICATIONS”.
Before shooting pictures, make the following camera settings.
Camera
VN-EZ5
VN-EZ5EW
VN-EZ5EW
VL-MX1
VL-ME100S VL-ME100E
VL-ME100S VL-ME100E
Settings
Menu <1/2>
Image size
: 640 x 480
Flash
: off
Focus
: auto
Exposure compensation : -2.0 EV
Menu <2/2>
White balance
: auto
Shooting settings
Image quality : fine
Image size
Image size
: 640 x 480
Manual settings (Selector switch at MANUAL)
White balance : Outdoor
Iris
Iris
: To be adjusted according to brightness
Gain
: +6 dB
Shutter
: 30
Remarks
・ Still image mode
・ Zoom function prohibited
・ Zoom function prohibited
・ Media selector switch at CARD (SD card required)
・ Zoom function allowed
・ Zoom function allowed
Keep the other camera settings at default.
* The image size is limited to 640 x 480 only.
When taking pictures, do not use the zoom function. (VN-EZ5/VN-EZ5W)
* The image size is limited to 640 x 480 only.
When taking pictures, do not use the zoom function. (VN-EZ5/VN-EZ5W)
2-4. PREPARING THE PROJECTOR
Switch on the LCD projector and warm it up enough.
Set the projection screen size to 40 inches or so (30 inches or so if the image is dark).
This size is flexibly adjustable, but 40 inches are the best in terms of the brightness and color irregularity
detection.
The screen itself should be white in color and low in gain factor.
Project images in a place as dark as possible. An incoming external light may fail to recognize dark-
pattern images.
Set the projection screen size to 40 inches or so (30 inches or so if the image is dark).
This size is flexibly adjustable, but 40 inches are the best in terms of the brightness and color irregularity
detection.
The screen itself should be white in color and low in gain factor.
Project images in a place as dark as possible. An incoming external light may fail to recognize dark-
pattern images.
2-5. MAKING CONNECTIONS
Connect the RS232C cross cable between the computer and the projector.
RS232C cross cable
* If a 10 m long cable is used, communication errors may occur, which may fail to send corrections.
Employ a shortest possible cable.
LCD projector
<XV-Z7000>
Click on the first or last page to see other PG-C20XE (serv.man3) service manuals if exist.