Read Sharp PG-A10X (serv.man35) Driver / Update online
97
T
roubleshooting
Lamp Error
The lamp does not ignite.
The lamp does not ignite.
[Problem]
Burnt-out lamp. / Lamp circuit failure.
[Possible Solution]
a. Carefully replace the lamp and reset the lamp timer.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Burnt-out lamp. / Lamp circuit failure.
[Possible Solution]
a. Carefully replace the lamp and reset the lamp timer.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
No response from the projector.
Communication Error
Communication Error
[Problem]
Communications with the projector cannot be established for some reason.
[Possible Solution]
Set the computer and projector to the same communications speed.
Check the connections of the cables.
Communications with the projector cannot be established for some reason.
[Possible Solution]
Set the computer and projector to the same communications speed.
Check the connections of the cables.
COM1 is already used by other application software.
[Possible Solution]
Use a COM port not being used by another application software.
Use a COM port not being used by another application software.
Failed to connect to the projector via LAN.
[Problem]
The projector is being controlled already from another PC via the LAN.
[Possible Solution]
Cancel the control from the other PC.
The projector is being controlled already from another PC via the LAN.
[Possible Solution]
Cancel the control from the other PC.
This command cannot be used with this projector now.
[Problem]
A projector with that function has not been selected in “Projector Setting”.
[Possible Solution]
Select an appropriate projector in “Projector Setting”.
A projector with that function has not been selected in “Projector Setting”.
[Possible Solution]
Select an appropriate projector in “Projector Setting”.
Some functions may not be usable under certain circumstances. For example, the “Auto
Sync.” function cannot be used if no image source is being input to the projector. The
above error message appears in such cases as well.
Sync.” function cannot be used if no image source is being input to the projector. The
above error message appears in such cases as well.
Click on the first or last page to see other PG-A10X (serv.man35) service manuals if exist.