Read Sharp PG-A10X (serv.man35) Driver / Update online
96
List of Error Messages
The internal temperature is abnormally high.
The internal temperature is high.
Temperature Error
The internal temperature is high.
Temperature Error
[Problem]
Blocked air intake. / Clogged air filter.
Cooling fan breakdown. / Internal circuit failure.
[Possible Solution]
a. Relocate the projector to an area with proper ventilation.
b. Replace the filter.
c. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Blocked air intake. / Clogged air filter.
Cooling fan breakdown. / Internal circuit failure.
[Possible Solution]
a. Relocate the projector to an area with proper ventilation.
b. Replace the filter.
c. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
The cooling fan is not operating.
Internal Cooling Fan Error
Internal Cooling Fan Error
[Problem]
Cooling fan breakdown.
[Possible Solution]
Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
Cooling fan breakdown.
[Possible Solution]
Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
The filter cover is open.
Filter Cover Error
Filter Cover Error
[Problem]
The filter cover is not properly mounted, or filter is not properly mounted.
[Possible Solution]
Mount the filter cover and filter properly.
The filter cover is not properly mounted, or filter is not properly mounted.
[Possible Solution]
Mount the filter cover and filter properly.
If this error message appears even though the filter cover is properly mounted, take the
projector to your nearest Authorized Sharp Industrial LCD Products Dealer or Service
Center for repair.
projector to your nearest Authorized Sharp Industrial LCD Products Dealer or Service
Center for repair.
The remaining lamp life is below 100 hours.
[Possible Solution]
a. Carefully replace the lamp and reset the lamp timer.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
a. Carefully replace the lamp and reset the lamp timer.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
The lamp is burnt-out.
[Possible Solution]
a. Carefully replace the lamp and reset the lamp timer.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
a. Carefully replace the lamp and reset the lamp timer.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
Click on the first or last page to see other PG-A10X (serv.man35) service manuals if exist.