Read Sharp PG-A10S (serv.man26) User Guide / Operation Manual online
-20
Connecting to a
Computer Using a DIN-D-
sub RS-232C Adaptor
and an RS-232C Serial
Control Cable
Computer Using a DIN-D-
sub RS-232C Adaptor
and an RS-232C Serial
Control Cable
When the RS-232C terminal on the projector is
connected to a computer with a DIN-D-sub RS-
232C adaptor and an RS-232C serial control
cable (cross type, sold separately), the com-
puter can be used to control the projector and
check the status of the projector. See page
connected to a computer with a DIN-D-sub RS-
232C adaptor and an RS-232C serial control
cable (cross type, sold separately), the com-
puter can be used to control the projector and
check the status of the projector. See page
61
for details.
1
Connect the supplied DIN-D-sub
RS-232C adaptor to an RS-232C
serial control cable (sold sepa-
rately).
RS-232C adaptor to an RS-232C
serial control cable (sold sepa-
rately).
2
Use the above cables to connect
the projector and the computer.
the projector and the computer.
Note
• Do not connect or disconnect an RS-232C
serial control cable to or from the computer
while it is on. This may damage your com-
puter.
while it is on. This may damage your com-
puter.
• The RS-232C function may not operate if
your computer terminal is not correctly set
up. Refer to the operation manual of the
computer for details.
up. Refer to the operation manual of the
computer for details.
• See page
60
for connection of an RS-232C
serial control cable.
Optional
cable
cable
RS-232C serial control cable
Type: AN-C10RS (32'10" (10.0 m))
Type: AN-C10RS (32'10" (10.0 m))
To RS-232C terminal
DIN-D-sub
RS-232C adaptor
RS-232C adaptor
Supplied
accessory
accessory
Computer
RS-232C serial
control cable
(sold separately)
control cable
(sold separately)
DIN-D-sub
RS-232C
adaptor
RS-232C
adaptor
Controlling the Projector Using a Computer
-20
Connecting the Projector to Other Devices
Click on the first or last page to see other PG-A10S (serv.man26) service manuals if exist.