MX-XB17. Service Manual December 2011. - Sharp Copying Equipment Service Manual (repair manual). Page 73

MX-FX13 TROUBLE CODE LIST 5 - 2

• When communication result is OK, the communication result sub

code 1 and sub code 2 are 0000.

• <  > indicates the communication means. <Send>, send;

<Receive>, receive; <Poll>, polling; <Bulletin>, bulletin board

The status code from the modem in V.34 mode is indicated with the
communication result sub code 1 (top 2 digits). However, the com-
munication sub code 1 is 00 in communication other than V.34
mode.

42

R e c e p t i o n
length over

When the received data length of
one page exceeds the range dur-
ing reception, <Receive/Poll>

44

D o c u m e n t
error

When a document jam occurs
d u r i n g   d i r e c t   t r a n s m i s s i o n ,
<Send>

46

No response
from the other
party

When the FAX signal from the
other party is not detected within
T1 time, <Send/Poll>

48

OK

Communication normal end

49

T h e   o t h e r
par ty has no
po llin g func-
tion.

When the called side has no poll-
ing function in polling reception,
<Poll>
When the called side has no
transmission data, <Bulletin>

50

Polling is not
accepted.

When DCN is received for DTC
in polling reception, <Poll>

When there is no transmission
data  i n  pol ling  tran smission,
<Bulletin>

51

Polling allow
n u m b e r   d i s -
crepancy

When the allow number does not
coincide in polling transmission,
<Bulletin>

When the system number does
not coincide in polling transmis-
sion, <Bulletin>

56

Interface not
accepted

1) When DCN is received for

NSS in transmission of the

relay instruction, <Send>

2) When a receiving station

number that is not registered

is instructed in reception of

the relay instruction,
<Receive>

3) When F code relay

instruction is received during

F code relay broadcasting,
<Receive>

59

T h e   o t h e r
par ty has no
function of F
code bulletin
board.

When the other party machine
does not have DIS bit 47 (Selec-
tive polling function) in F code
polling (ringing), <Poll>

60

F   c o d e   p o l l -
i n g   i s   n o t
accepted.

When DCN is received for SEP
in F code polling (ringing), <Poll>
When there is no transmission
data for SEP in bulletin board,
<Bulletin>

61

F code bulle-
t i n   b o a r d
n u m b e r   d i s -
crepancy

When the sub address (bulletin
board number (SEP)) does not
coincide in bulletin board, <Bulle-
tin>

62

F code bulle-
t i n   b o a r d
password dis-
crepancy

W h e n  t h e   p a s s   c o d e   ( PW D )
do es no t co in ci de  in bu lle tin
board, <Bulletin>

63

T h e   o t h e r
par ty has no
function of F
code.

When the other party machine
does not have DIS bit 49 (sub
a d d r e s s   c a p a c i t y )  i n   F  c o d e
transmission, <Send>. Check
that the other party machine con-
forms to F code.

Result code 

(Communica-

tion result)

Communica-

tion report 

result 

column

Communication interruption 

content

64

F code is not
accepted.

W he n F cod e is tran smitte d,
<Send>

1) When DCN is received for

SUB, check the BOX

number.

2) When DCN is received for

SID, check BOX number and

the pass code.

W h e n   F   c o d e   i s   r e c e i ve d ,
<Receive>

When the F code relay broadcast
function or the F code confiden-
tial reception function is inhibited
with soft switches.

67

F code pass-
word discrep-
ancy

When the pass code (SID) does
not coincide in F code reception,
<Receive>

68

BOX NO. NG

When a BOX number that is not
registered is instructed (SUB dis-
crepancy) in F code reception,
<Receive>

69

Memory over

Me mor y ove r i n q uick on lin e
sending

Result 

code 2

Communication interruption content

Transmission/

Reception

02

EOL time over

Reception

03

Carrier detection time over

Reception

06

Memory image decoding error

Reception

07

Memory image decoding error

Transmission

08

Time up between frames in phase C

Tr a n s m i s s i o n /
Reception

11

Polarity reversion detection

Reception

12

Invalid command reception

Reception

13

Time over (1min timer/6sec timer)

Reception

14

PUT error

Reception

15

In V.34 mode, time up is generated
when shifting from Primary to Con-
trol.

Reception

16

In V.34 mode, time up is generated
when shifting from Control to Pri-
mary.

Reception

20

Polarity reversion detection

Transmission

21

Invalid command reception

Transmission

22

Fall back retry number over

Transmission

23

Resend over of the number of times
of command retry

Transmission

24

Time over (T5 timer)

Transmission

25

Time over (T5 timer) in V.34 mode

Transmission

26

Time over occurrence during shift
from Primary to Control in V.34 mode

Transmission

28

Modem chip answering NG

Tr a n s m i s s i o n /
Reception

Result code 

(Communica-

tion result)

Communica-

tion report 

result 

column

Communication interruption 

content