Read Sharp MX-ST10 Service Manual online
MX-ST10 OPERATIONAL DESCRIPTIONS 3 - 5
8. Lead edge jogger control
The vertical line of paper discharged to the stack tray is aligned.
Initial operation
The home position is 4.5mm shifted from when turning ON the home sensor for every discharge in the home sensor direction.
If the series of operations will not be terminated within 2700msec, it is judged as an abnormality.
Operation in paper pass
When a job in the stack mode is started, the jogger is shifted to the standby position.
When paper is fed to the stacker, it is shifted to the pull-in position, and then shifted to the standby position again.
When a job in the stack mode is ended, it is shifted to the pull-in position. The stroke length of the lead edge jogger is 8mm, and the
returning and going speeds are 139mm/sec.
The home position is 4.5mm shifted from when turning ON the home sensor for every discharge in the home sensor direction.
If the series of operations will not be terminated within 2700msec, it is judged as an abnormality.
Operation in paper pass
When a job in the stack mode is started, the jogger is shifted to the standby position.
When paper is fed to the stacker, it is shifted to the pull-in position, and then shifted to the standby position again.
When a job in the stack mode is ended, it is shifted to the pull-in position. The stroke length of the lead edge jogger is 8mm, and the
returning and going speeds are 139mm/sec.
Distance from the home to the wall: 491mm
[Operation in paper pass]
Standby position
(Alignment position)
(Alignment position)
Standby position
(Alignment position)
(Alignment position)
Pull-in position
Stack Tray
Stack Tray
Stack Tray
Click on the first or last page to see other MX-ST10 service manuals if exist.