Read Sharp MX-ST10 Service Manual online
MX-ST10 OPERATIONAL DESCRIPTIONS 3 - 4
7. Side jogger control
The side of paper discharged to the stack tray is aligned.
Initial operation
The home position is 3.5mm shifted from when turning ON the home sensor for every discharge in the home sensor direction. If the
series of operations will not be terminated within 1000msec, it is judged as an abnormality.
Operation in paper pass
• Jogger standby position
Front offset side: Front jogger; 5mm away from discharged paper. Rear jogger; 10.5mm away from discharged paper.
Rear offset side: Rear jogger; 5mm away from discharged paper. Front jogger; 10.5mm away from discharged paper.
• Jogger pull-in position
Front offset side: Front jogger, 5mm away from discharged paper which is shifted by 10mm. Rear jogger; 25mm away.
Rear offset side: Rear jogger; 5mm away from discharged paper which is shifted by 10mm. Front jogger; 25mm away.
The home position is 3.5mm shifted from when turning ON the home sensor for every discharge in the home sensor direction. If the
series of operations will not be terminated within 1000msec, it is judged as an abnormality.
Operation in paper pass
• Jogger standby position
Front offset side: Front jogger; 5mm away from discharged paper. Rear jogger; 10.5mm away from discharged paper.
Rear offset side: Rear jogger; 5mm away from discharged paper. Front jogger; 10.5mm away from discharged paper.
• Jogger pull-in position
Front offset side: Front jogger, 5mm away from discharged paper which is shifted by 10mm. Rear jogger; 25mm away.
Rear offset side: Rear jogger; 5mm away from discharged paper which is shifted by 10mm. Front jogger; 25mm away.
Rear
Front
Between jogger homes: 370mm
Front offset
Rear offset
Standby position
(Alignment position)
(Alignment position)
Standby position
(Alignment position)
(Alignment position)
Pull-in position
Shift operation
Shift operation
Click on the first or last page to see other MX-ST10 service manuals if exist.