Read Sharp MX-RB14 (serv.man3) Service Manual online
MX-7040N MX-RB14 (PAPER PASS UNIT) 7 – 2
4)
Install the dummy unit (Packed items No.1) and fix it with the
screws (Packed items No.13).
screws (Packed items No.13).
5)
Fix the ADU cabinet R lower (Packed items No.7) with the
screw (Packed items No.12).
screw (Packed items No.12).
6)
Fix the ADU cabinet F lower with the screws.
B. Install the connection plate
1)
Remove the LCC cabinet.
2)
Install the LCC cabinet with turning over it.
3)
Remove the screws and remove the covers.
Install the connecting plate lower F (Packed items No.8), con-
necting plate lower R (Packed items No.9) and fix it with a
screws (Packed items No.13).
Install the connecting plate lower F (Packed items No.8), con-
necting plate lower R (Packed items No.9) and fix it with a
screws (Packed items No.13).
NOTE: Remove the front and rear covers, then remove the
screws (in the rear side only) as shown in the figure
below. (The removed screws are not used.)
below. (The removed screws are not used.)
1
2
2
2
Click on the first or last page to see other MX-RB14 (serv.man3) service manuals if exist.